1. 如果主动上胶机没有自吸功能，会出现漏胶、掉胶现象;
　　1. If the active glue loader has no self-priming function, there will be glue leakage and glue dropping;
　　2. 气压过高会出现漏胶现象;
　　2. Rubber leakage will occur if the air pressure is too high;

　　3、如果是用于橡胶阀，则橡胶阀接口漏胶，可能要先清洗后重新安装，或更换零件。
　　3. If it is used for rubber valve, the rubber valve interface leaks rubber, which may need to be cleaned before reinstallation, or replacement parts.
　　4、有的使用的管道比上胶机多，检查软管是否连接好，有的还会由于接口不接口，导致空气中漏胶。
　　4. Some use more pipes than glue machine, check whether the hose is well connected, and some will cause glue leakage in the air because the interface is not connected.
　　以上是双组份打胶机生产厂家为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：//stalbans-escorts.com
　　The above is the relevant content introduced by the manufacturer of two-component dispenser. For more information, please visit the website: //stalbans-escorts.com